SALE Quick view Details Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare
SALE Quick view Details Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare
SALE Quick view Details ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare
Quick view Details ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP MSRP: Now: $25.20 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Details Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 MSRP: Now: $143.00 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view Details sku: HW150-360-134 4 CONE SET for 36mm shaft MSRP: Now: $303.33 Add to Cart Compare Quick view Details sku: 8476-40 Centering CONE 1.75 for 40mm shaft. MSRP: Now: $73.20 Add to Cart Compare SALE Quick view Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. Premium FLANGE PLATE AND COLLET set for Lug-Centric Wheel Mounting; 40mm shaft. Greatly increases wheel balancing accuracy by increasing the accuracy of the wheel mounting. Also allows the mounting of most CLAD WHEELS (plastic faced). See below regarding... MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare SALE Quick view Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 ProblemSolver! Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"... MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Includes Pressure Ring which can be replaced with a Clamping Cup (not included).Should fit the following models of wheel... MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare Quick view ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP Protecting rubber RING for 5" Clamping Cup on many Wheel Balancers. OEM / Aftermarket Interchanges: 0018618 MSRP: Now: $25.20 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare
SALE Quick view Details ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare
SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare
SALE Quick view Details ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare
Quick view Details Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 MSRP: Now: $143.00 Add to Cart Compare SALE Quick view Details ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view Details sku: HW150-360-134 4 CONE SET for 36mm shaft MSRP: Now: $303.33 Add to Cart Compare Quick view Details sku: 8476-40 Centering CONE 1.75 for 40mm shaft. MSRP: Now: $73.20 Add to Cart Compare SALE Quick view Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. Premium FLANGE PLATE AND COLLET set for Lug-Centric Wheel Mounting; 40mm shaft. Greatly increases wheel balancing accuracy by increasing the accuracy of the wheel mounting. Also allows the mounting of most CLAD WHEELS (plastic faced). See below regarding... MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare SALE Quick view Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 ProblemSolver! Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"... MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Includes Pressure Ring which can be replaced with a Clamping Cup (not included).Should fit the following models of wheel... MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare Quick view ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP Protecting rubber RING for 5" Clamping Cup on many Wheel Balancers. OEM / Aftermarket Interchanges: 0018618 MSRP: Now: $25.20 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view Details ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare
Quick view Details sku: HW150-360-134 4 CONE SET for 36mm shaft MSRP: Now: $303.33 Add to Cart Compare Quick view Details sku: 8476-40 Centering CONE 1.75 for 40mm shaft. MSRP: Now: $73.20 Add to Cart Compare SALE Quick view Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. Premium FLANGE PLATE AND COLLET set for Lug-Centric Wheel Mounting; 40mm shaft. Greatly increases wheel balancing accuracy by increasing the accuracy of the wheel mounting. Also allows the mounting of most CLAD WHEELS (plastic faced). See below regarding... MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare SALE Quick view Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 ProblemSolver! Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"... MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Includes Pressure Ring which can be replaced with a Clamping Cup (not included).Should fit the following models of wheel... MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare Quick view ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP Protecting rubber RING for 5" Clamping Cup on many Wheel Balancers. OEM / Aftermarket Interchanges: 0018618 MSRP: Now: $25.20 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details sku: 8476-40 Centering CONE 1.75 for 40mm shaft. MSRP: Now: $73.20 Add to Cart Compare SALE Quick view Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. Premium FLANGE PLATE AND COLLET set for Lug-Centric Wheel Mounting; 40mm shaft. Greatly increases wheel balancing accuracy by increasing the accuracy of the wheel mounting. Also allows the mounting of most CLAD WHEELS (plastic faced). See below regarding... MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare SALE Quick view Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 ProblemSolver! Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"... MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Includes Pressure Ring which can be replaced with a Clamping Cup (not included).Should fit the following models of wheel... MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare Quick view ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP Protecting rubber RING for 5" Clamping Cup on many Wheel Balancers. OEM / Aftermarket Interchanges: 0018618 MSRP: Now: $25.20 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view Haweka® | sku: HW280-400-090 Premium Flange Plate System with Collets for 40mm shaft. Haweka. Premium FLANGE PLATE AND COLLET set for Lug-Centric Wheel Mounting; 40mm shaft. Greatly increases wheel balancing accuracy by increasing the accuracy of the wheel mounting. Also allows the mounting of most CLAD WHEELS (plastic faced). See below regarding... MSRP: $1,865.00 Was: $1,865.00 Now: $1,745.00 Add to Cart Compare
SALE Quick view Haweka® | sku: HW150-400-091 Medium Truck Kit for 40mm shaft. HW150-400-091 ProblemSolver! Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"... MSRP: Was: $357.50 Now: $303.88 Add to Cart Compare
SALE Quick view ShopEquipmentParts brand | sku: 143-404-003-SEP Economy 40 mm X 4 mm, Quick Clamp-nut with Pressure Ring Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Includes Pressure Ring which can be replaced with a Clamping Cup (not included).Should fit the following models of wheel... MSRP: Was: $99.16 Now: $59.50 Add to Cart Compare
Quick view ShopEquipmentParts brand | sku: 190-008-005-SEP RING, Protecting, for Clamping Cup. 190-008-005-SEP Protecting rubber RING for 5" Clamping Cup on many Wheel Balancers. OEM / Aftermarket Interchanges: 0018618 MSRP: Now: $25.20 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view ShopEquipmentParts brand | sku: QCN-40-3 Economy 40 mm x 3 mm, Quick Clamp-nut. QCN-40-3 Economy quick clamping WINGNUT for 40mm X 3mm shafts. Fits some Accuturn, Beissbarth, Coats, Corghi, Hunter, and Sicam brand Wheel Balancers. Includes pressure ring.Should fit the following models of wheel balancers with a 40mm X 3mm shaft. To check,... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare
SALE Quick view ShopEquipmentParts brand | sku: QCN-36-3 Economy 36mm X 3 mm, QuickNut WINGNUT. QCN-36-3 Economy quick clamping WINGNUT for 36mm X 3mm shafts. Fits some Accuturn, Ammco, CEMB, and Ranger brand Wheel Balancers. Also fits many un-branded and privately branded imported machines with a 36mm shaft.Should fit the following models of wheel... MSRP: Was: $169.46 Now: $118.62 Add to Cart Compare
SALE Quick view ShopEquipmentParts brand | sku: QCN-40-CUP CUP, Clamping; for QCN-40 Clamp-nuts. QCN-40-CUP Clamping CUP for our QCN-40-4 Clamp-nut. Comes with replaceable protective Ring. MSRP: Was: $30.78 Now: $26.55 Add to Cart Compare
SALE Quick view ShopEquipmentParts brand | sku: QCN-40-4 Economy 40 mm X 4 mm, Quick Clamp-nut. QCN-40-4 Economy quick Clamp-nut for 40mm X 4mm shafts. Fits some Accu-Turn, FMC, John Bean (JBC), some CEMB, some COATS, and some HOFMANN. Should fit the following models of wheel balancers with a 40mm X 4mm shaft. To check, measure the diameter (40mm) and the... MSRP: Was: $169.46 Now: $118.62 Email or call for availability Compare
Quick view Precision Chuck brand | sku: 90041 Extra LARGE JAWS for Quick-Chuck Balancer Adapter. 90041 Extra LARGE JAW SET for our 90028BK and 90040BK Quick-Chuck Balancer Adapter. Increases the maximum clamping range from 7.13" to 9.12". MSRP: Now: $143.00 Add to Cart Compare SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view ShopEquipmentParts brand | sku: WB-1030-7102 CUP, wheel clamping. Economy. WB-1030-7102 Economy Wheel mounting CUP. Snaps on the wing nut. Imported.Fits all Haweka QuickNut Wingnuts and most others. Related Accessories: Protective RUBBER RING, click here to view. OEM / Aftermarket Interchanges: HW190-008-002 MSRP: Was: $46.80 Now: $37.44 Add to Cart Compare
Quick view sku: HW150-360-134 4 CONE SET for 36mm shaft 4 PIECE CENTERING CONE SET for Wheel Balancers with a 36mm diameter shaft. Covers 1.75" - 5.25" (43mm - 133mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting... MSRP: Now: $303.33 Add to Cart Compare Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected
Quick view sku: 8476-40 Centering CONE 1.75 for 40mm shaft. Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft. Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,... MSRP: Now: $73.20 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected