ShopEquipmentParts brand

Inflation AIR CHUCK, clip-on. 8410419

Clip-on Inflation AIR CHUCK. 1/4" hose barb connector (for 1/4" ID hose).

SHAFT BUSHING to adapt Tire Changer Motor

SHAFT BUSHING to install a Pulley with a 3/4" bore on our MO181100 Electric Motor.  Can be used to adapt our MO181100 to a Hunter TCX500 Tire Changer.

REPAIR KIT, Clamping Brake; for Hunter

REPAIR KIT for the Clamping Brake on some Hunter brand Tire Changers. Fits some models with the 4-arm clamps like the TC-3250 and TC-3500. If the clamps rotate when they are supposed to expand or...

OIL, Air Tool & Tire Changer. Pint.

Tire Changer and Air Tool Oil. Suitable for the in-line Air Oiler / Lubricator on Tire Changers and most other shop equipment that benefits from lubrication in the air supply. Acceptable substitute...

TOOLHEAD, Wide; for Hunter TCA34. RP6-710014120

Wide Leverless TOOLHEAD for Hunter brand TCA34 (Auto34) and TC3900 Lever-less Tire Changers (TCA34 with serial numbers 664 and higher).   OEM / Aftermarket Interchanges:...

FILTER, Air; 1/4" NPT with Metal Bowl. AF3000-02M

1/4" (national pipe thread) Compressed Air FILTER with metal bowl. 70 SCFM (standard cubic feet per minute) flow rate.   OEM / Aftermarket Interchanges: 8822R .

Combo AIR TREATMENT UNIT for Tire Changers

Combination AIR TREATMENT UNIT for most Tire Changers. Filter, Regulator, Gauge, Port for Un-Lubricated Air, and Lubricator. Includes mounting brackets. Rugged METAL BOWLS for Filter and Oiler. 1/4"...

FILTER - REGULATOR Combo Unit, 1/4". AW3000-02

FILTER - REGULATOR Combination Unit. Has 1/4" NPT ports in and out; and 1/8" NPT gauge ports (plugs are included for the gauge ports). Gauge ports are on both sides so that you can install the unit...

REGULATOR, Compressed Air; 1/4", 88 scfm

Compressed Air REGULATOR, 1/4" npt (pipe thread). Rated at 88 scfm (standard cubic feet per minute). Maximum inlet pressure 150 psi. Adjustment range 125 psi. Includes GAUGE and BRACKET. OEM /...

Air Exhaust MUFFLER, 1/4", 5 Pack.

Bag of 5 Air Exhaust MUFFLERS (aka Silencers). 1/4" male pipe thread fits most Tire Changer applications. Commonly found on the valves of Tire Changers and other air operated equipment. Helps quiet...

CUP for Air Blast Dump Valve on Hunter brand. RP6-0481-CUP

Replacement CUP for the Air Blast Dump Valve on many Hunter brand Tire Changers. The valve is usually mounted right near the air tank. When this cup is bad, the Air Blast for seating beads will not...

CUP, Check Valve, for Hunter. RP6-0718

Check valve CUP for Hunter and Ravaglioli (RAV) brand tire changers with 4-arm "tulip" type wheel clamping.   The air hoses connect to the air motor through a double check valve (one for each...